This new method, used by the author, makes it possible to quickly spread small products like a glass or glasses for an egg on a planhabe with a wooden pad. Near the adhesive layer should be sharpened carefully so that it does not arise.
First draw several concentric circles on the Planeshabe for centering the workpiece.
Using a gun with a thermic mesh, secure the workpiece on the planhabe. The end must be perfectly flat and dry at the beginning of the turning for additional support, you can use the rear grandmother. The advantage of this method in the ability to sharpen the end and good access of the tool is true there are several types of cartridges that give the same result as this method
After processing the end, you can sharpen a thinner side profile. Sovele the detachment groove, according to which, as the last step, the part will be cut off after grinding 3 the Cleaned product is cut off with a boat saw when the machine turns off. With the acquisition of experience, you can completely cut off the product but the machine, and it will just fall into your hand.
