Construction tools
The main task of the metal tape for metal is the high performance of the metal cutting process of various types that are used in modern engineering. In addition, various plastics can be used as a processed material for tape saws on metal. After all, they, due to an increased fragility indicator, require a higher cutting rate.
Thanks to the use of tape -sawing machines, the optimal metal consumption is carried out for the reason that the width of the cut is reduced. In addition, productivity is growing, and the costs of electricity consumption are reduced.
Latu sawing machines are classified depending on the degree of automation:
1. automatic tape drifts;
2. Hand -on tape saws for metal;
3. Latu -sawing machines for a semi -automatic type of metal.
Automatic ribbon -sawing machines for metal function in automatic mode: the workpiece is supplied to a given size, the saw frame rises and lowers into its original position according to a certain program. The blanks are clamped automatically. The machines have a throttle hydraulic supply cylinder, with which the speed of the saw frame is adjusted in automatic mode depending on the profile of the workpiece. Moreover, in the process, the operator’s participation was not necessarily.
In the process of work of the 2nd type of tape-saw machines for the worker, the need to lower the saw on the workpiece manually is eradicated. Employees should only lower the saw before touching the subject. As a result, this process will occur quite smoothly, and there will be no.
Type 3-type bandages (semi-automatic) are characterized by lifting the saw frame and lowering it into its original position in automatic mode. In this machine, it is possible to vary clamping of workpieces – it can be not only manual, but also hydraulic.
