Door installation is a rather troublesome thing and difficult. But it is necessary to finish finishing work – to nail the skirting board. When it is better to do it?
Skirting boards can both confuse to the wall and screw them. First, measure the location of the openings for fastening. Then drill them in the wall. Dowel is installed in the holes, and then the shock nails are nailed. Sometimes screws are screwed with a screwdriver. The fact is that the shock dowel enters the wall tightly: you can’t get it out of the wall so simply. But it is much easier to remove the self -tapping screw from the wall.
Plastic, wood, MDF: which is more convenient?
The most fragile plinth is made of plastic. It is better to install it once, because then without damage it will be difficult to remove from the wall. Wooden skirting boards look rude, but they can be installed several times. The skirting board for the laminate is installed using special Klyammers. This installation method is the most convenient, because you can always fix the situation.
But no matter what kind of skirting boards you choose, it is better to observe the procedure for its installation. Paul laying is the basis of everything. Easier to adjust the height of the door than select the thickness of the screed and coating. When the floor is laid, we install the door. We select the height at which it will be located. The canvas should go in the opening free. The corner of the door in no case should not cling to the floor. It should be noted that the door can go down a little if the hinges are not very reliable.
The skirting board in the room can be placed immediately after the end of the floor is completed, and near the door it will have to be mounted in the last turn. For fireproof and hacking doors, special platbands are used. First we install the platbands, and after that you can measure the distance from the corner to the end of the platbands. Now we know exactly how long the skirting board will be, and we can calmly install it on the wall.
