Laminate – one of the types of flooring. Currently gained great popularity for reliability, ease of installation, environmental purity and absolutely harmless.
Before performing the work, you should check the state of the floor. It should be even, dry, without different radical ones and damage. At the first stage, we waterproof. For this, polyethylene is suitable, which is laid out, with the release of 3-5 centimeters to walls. For sound and thermal insulation, lay a special shock absorber 2-3 mm thick. In this case, laying is carried out. Now we decide in which direction to lay the panels. Best parallel to sunlight. This will hide the joints of the connections, we start laying from the far corner of the room, in relation to the entrance – left. Remove the dimensions of the room in advance, and calculate the optimal sequence of laying panels. We take into account the gap between the wall and the coating (8-10mm).In the above, corner, groove to ourselves, lay the first panel. Next, the end part at an angle we attach the following. We press to the floor, snap the lock, thereby fixing them tightly with each other, then the third and so on. If necessary, cut off. In a similar way we collect the second row, but with a displacement of 50 centimeters in relation to the previous. Thus, the mechanical load will be distributed evenly and the relationship of the entire coating will increase. After assembling the second row, we will join it with the first. Raise in the collected form and insert under the slope into the castle of the first row. Press, snap the castle. Now we have two rows ready. In the same way we lay the entire coating. At the end, we install skirting boards and thorns.
