For all the apparent simplicity, a frame house is by no means a house of cards, but a full -fledged structure that meets the requirements of heat engineering.
The frame-frame option does not require the use of special equipment. In fact, this is a kind of designer, which is collected on the spot. The spatial stability of the frame is ensured by the device of the upper and lower strands, horizontal and vertical connections according to the main racks. For external sheathing, cement-stoves, plywood of the FSF brand or OSB3 stoves are used. With a qualitatively exhibited frame, it is advisable to use the CSP as internal casing.
During the construction of a shield house, special equipment helps will already be required. Bulstarly shields are made in factories, for their transportation you need a length meter, and the tap for installation is needed. From the pluses, it should be noted that the use of shields allows you to reduce the construction time. No need to separately perform insulation and suturing. However, with poor -quality panels, the main problem may be the fitting and sealing joints.
Mineral wool is most often used as insulation. The material is susceptible to the formation of condensate and requires the device of high -quality vapor barrier. If the means allowed to use extrusion foam polystyrene instead of mineral oh wool. This material has a longer service life and less damage from a poorly performed vapor barrier.
Wood quality requirements. It is normal – well -dried calibrated beam. The problem is that a beam of this quality in domestic construction markets is practically not found. Therefore, for the construction of a frame house, it is better to attract people who know how to level the shortcomings of wood.
How to choose the right base for a frame house.
Depending on the properties of soils, the foundation can be tape or pile with a monolithic grillage. The base of wooden farms is mounted on the grillage. On the upper belt of the farms is covered with finishing floor.
