Keracanite tiles are so universal that it can be laid on any type of surface, including a wooden. The only condition will be that the base should be even, since the tile is not able to bend and, as a result, will not be able to align the surface. The adhesive composition is applied evenly, monitoring and preventing the occurrence of bubbles. This is especially important if thin tiles are laid. Laying tiles without seams is not recommended, otherwise such a coating will be very sensitive to temperature fluctuations: when cooling or heating, the tiles can jump out of its place.
And you can also learn about car rental in Germany by clicking on this link and finding out a lot of information about car rentals in Germany.
Wheeling should be carried out at positive temperature values of 5-30 ° C. Cutting tiles are often carried out with a tile cutter. In the event that its thickness is too large, a diamond disk is used, while the coolant may be needed. To fill the seams will have to resort to a special grout – this will eliminate their cracking and pollution. The composition of the grout is similar to glue, the only thing that is added there color pigments.
The process of laying porcelain tiles, of course, has individual characteristics. First of all, they are convinced whether the floor is swinging under human weight. This will be the guarantor that the tile will not crack. According to the recommendations of experts, it will be better to use a reinforcing grid. In the process of preparing the adhesive composition, there you need to add PVA to improve clutch.
Laying is carried out similarly as usual, however, after each row, it is necessary to ensure that the glue in the seams does not occur. It is important to note that after laying the plates, you cannot immediately grout the seams, since this can ruin the result of the work. To give evenness, at the seams it will not be superfluous to go through a plastic tube.