On average, the masters are taken for the installation of one set of platbands – from 500 to 1500 rubles, depending on the complexity of work, such as platbands and wood breed. The more valuable the tree is the more expensive canvas, platbands and work on their installation. But if desired, wooden platbands can be installed independently. The main thing is equipped with all the necessary equipment, and it needs it here quite a bit. For work, you need a construction level, roulette special device – knock, nails and hammer. In general, this is all necessary.
First, it is necessary to measure the width of the door frame and record the result, then measure the door length and also write down the result. After that, using roulette and pencil, we transfer the results obtained to the platbands. Having made a mark in the right place, we place the platband in the knock. Knock is a special device that is made of wood or plastic. Using it, you can cut or saw different building materials strictly at the right angle. Dear visitors of our site, we want to offer you machines for cutting reinforcement, after going on the link we specified, you will find a lot of information about machine tools for cutting. By applying the platband to the straps, we saw our pieces of the desired length and at the required corners. When you cut the corners, you should be careful, because you can turn the angle in the wrong direction and ruin the canvas.
When the blanks are sawn and ready, we proceed directly to their installation. First we beat the upper part. We align it with the help of the level and nullify it to the box with small nails. 3-4 nails are enough for them to hold. When the upper part of the platbands is installed, you can start installing the side parts. They can be leveled with a plumb line. If it is not, you can do it yourself, tied something heavy to the thread.
Subject to all the rules, the final result is rampant to get a very accurate.
