Drywall is very running material when decorating premises. There are several ways to install drywall. Today we will consider the method of attaching it on a wooden frame. For this you will need rails 2.5 * 4 cm, which are fixed vertically at a distance of 30 – 50 cm from each other. Before starting work, you should marke the wall with a marker. Reiki 2.5 * 8 cm should be used in those places where you will have cornices, various household appliances and other equipment attached in certain places. If you have a wooden wall you should use to attach these screws of screws or nails, if you are brick, then you should use dowels.
Next, you should know that the distance between the seams of the drywall is determined depending on which finish will be used. If you are going to leave the seams open, you can leave 8 – 10 mm, and if you are going to putty then – 5 mm.
If you are interested in the ceiling cladding, you know, this principle is slightly different from the previous one. First, you fasten wooden rails around the perimeter using a metal profile, and to concrete overlap, on the suspenses it is worth attaching a support beam. The most difficult part of this work is that you will have to keep a whole sheet of drywall by weight. To cope with this, you should call someone to help. Do not forget about lighting sources! For this case, a small distance is left between drywall and overlap. And remember that the frame made of wood is used only in dry rooms, because if you make such a frame in a room with high humidity, your entire work will be damaged.
