Linoleum is one of the most popular coatings. In the main one due to cheap cost, ease in cleaning and laying. Linoleum is not occupied by a large amount of effort and time – the coating is carried out simply and fits on the floor, and then cut, permissible, gluing most fragments. It seems that this material does not require preparation, but not everything is so simple. This coating has a “memory” of the surface, all huge floor defects will appear on linoleum in particular, if it has a small thickness of the substrate material. Because of this, styling is carried out on a clean and smooth, but not inevitably straightforward surface. A car pawnshop is very popular now, many motorists use it services.
The standard technology for laying linoleum coating on the concrete base of the floor provides for a flat surface to arrange a screed from cement. A similar method of conducting work is very laborious, because it is associated with “wet” processes. In addition, such a basis is cool to the touch, which does not contribute to the formation of convenient conditions, and the temperature regime of the floor does not always meet sanitary and hygienic standards.
Linoleum is a rather elastic type of material, that’s why the basis on which it is laid must be carefully processed, since even insignificant irregularities of the floor will be very noticeable on the outer circulation of linoleum. In addition, these areas will be subjected to more intense abrasion into the difference from other surface.
Even in a room with a wooden floor with a perfectly flat surface you will have to nail the fiberboard. Over time, a tree can change the shape, which can greatly affect the coating. Laying will prevent this. However, in the case when the floor has significant changes in the elevation, the fiberboard is replaced by a plywood that has a thickness of about one centimeter, based on the situation when sheets should not bend under linoleum. At the end of the installation of the edges of the material, you need to be baptized with sandpaper when the “transitions” occur.
