Plastic panels Modern material with a beautiful appearance, bringing a certain lightness to the ceiling, decorating it with a beautiful pattern, bringing a highlight to the room. Therefore, our current theme will be the installation of plastic panels on the ceiling. We also advise you to watch a video of the installation of a suspended river ceiling. To start installing plastic panels on the ceiling, you need to prepare the surface of the ceiling. The surface of the ceiling should not be perfectly flat, can have obvious visible defects, but without large cracks and seams.
The most common way to install plastic panels on the ceiling is installation on a frame of wooden racks. The frame is installed around the perimeter of the room, and the profiles are installed on it, and then the plastic panels.
All this below is like a children’s designer, which is easy to add up. Between the ceiling and the panel, a gap that can be used for insulation is obtained. Before installing the panels, lay a layer of thermal insulation material.
A more new and modern way of installing plastic panels on the ceiling is the laying of plastic panels directly on the mounting profile and fasteners. This method requires a certain installation order:
– The metal profile is mounted on perpendicular to the installation of future panels, their direction;
– The location of the strips on the ceiling, the distance between them is 40cm;
– checking the location of all structural structural structures is performed by level.
Installation of the ceiling begins with installation of the frame, mounting profile around the perimeter of the room. Fix the frame with self -tapping screws or screws. When installing plastic panels, make sure that there are no gaps, the panels should be tightly adjacent to each other.
Installation of plastic panels on the ceiling video
The fastening of plastic panels directly to the ceiling, the surface of which should be perfectly flat, is carried out with liquid nails, self -tapping screws, building staplers. This method of installing plastic panels on the ceiling is applicable for small rooms, corridors, bathrooms, bathrooms, the ceiling finish of which does not require installation of strong frames.
Plastic panels are pre -marked on the ceiling, then apply liquid nails to the points and applied to a pre -intended place, holding it tightly for several minutes, released. It is possible to maintain with liquid nails to support with flows or screws, fixing them on four sides of the sheet with liquid nails.
Whatever the method is used to install plastic panels on the ceiling, the result will be a beautiful surface, even, not attracting dust and dirt, always clean non -care costs and cleaning.
