Today, more and more often you can find buildings from sandwich panels. Such buildings in the recent past would cause ridicule, meanwhile, in Canada or Finland, these buildings became national pride. The characteristics of these buildings exceed expectations in many respects. The exception is only the characteristics of the strength, since the design of the sandwich does not imply stability with significant natural manifestations in the form of natural disasters. Although, if you build a reinforced concrete structure in the form of a frame, these moments of technological disadvantages will not become relevant.
Today, more and more often you can find buildings from sandwich panels. Such buildings in the recent past would cause ridicule, meanwhile, in Canada or Finland, these buildings became national pride. The characteristics of these buildings exceed expectations in many respects. The exception is only the characteristics of the strength, since the design of the sandwich does not imply stability with significant natural manifestations in the form of natural disasters. Although, if you build a reinforced concrete structure in the form of a frame, these moments of technological disadvantages will not become relevant.
In preparation for mounting the frame, an important technical moment is the device of the foundation of the base. This is not like buying sandwich panels, since in our time it is not so difficult to purchase these products, it is full and at different price. During preparatory work, it is important to take into account the presence or presence of all communications, this will reduce the cost of the project of the future structure. The installation of the foundation part of the structure needs to be performed by various studies to obtain topographic and geodetic materials, research precisely engineering and geodetic, which it is better to entrust professionals.
What cannot be said about mounting the structure, because even a person can be carried out without certain skills. The main requirement remains only compliance with engineering and technical requirements. This implies the accuracy of mounting the elements of the frame and its subsequent sheathing. It is mainly required to arrange a fairly strong base. The foundation and its laying in the construction of the house in comparison with the warehouse, or what industrial buildings are of course different. Because of which you should refer to the technical characteristics separately. But in general terms, it is quite simple.
In its bulk, when mounting buildings of the house, a strip foundation is used, with masonry elements using bricks. This type of foundation will most reliably arrange the waterproofing of the structure. After the foundation is arranged, you can start mounting not only the main structural elements, but also mounting the panels, while not only the roof from the sandwich panels can be assembled, but windows and other parts of the interior are inserted, since the structure does not shrink. With all, the mounting of the roof is no different from the mounting of the wall parts, with some insignificant exception.
It is good when the walls with elements of roofing structures are mounted, so the task of mounting the roof itself is greatly simplified. In addition to the fact that the transverse beams have eighty centimeters of the distance among themselves, they need to join them using specialized stainless bolts. If the wall panel has a wooden casing, then the ceiling metal surface that the film protects. It needs to be removed from the surface immediately after the completion of all construction work.
